Відео

Danko for nice and easy Demonstration 😊

Nice, you just saved me 250 dollars. Many thanks.

I have a 2009 armada and it does not have a push button start, so what do i do ?

My 2016 yukon does not have the rubber spot. There is a torx there instead but after taking out I can't see the peice I need to unscrew.

thank u. girlfriend was worried about changing the bulbs ourself. man u saved me.

sorry ford leaks rainwater down firewall into plug holes, requires new plug boots as old shrink up.

Im wanting to replace my dash speakers. I thought you had to remove the whole dash pad but looks like you dont? All I'd have to do is remove the pad above the instrument cluster, pillars, and plastic pad near the windshield?

Can you reprogram them before install on tyre or you have to do after installation inside tyre

Thank you! So I connected these wires and the horn still doesn’t work on my ‘15 PPV Tahoe

Aliexpress has mirrors

is there a smaller version of this tool for crankshafts ?? and where can i buy the 2

Big big error in this video. That was *NOT* the low pressure line, it was the HIGH pressure line. And it does not go to 'the radiator' it goes to the A/C _condenser_ which sits in front of the radiator!

I put brew new tires how come my sensor comes on ?

No, it didn't work. I'm at a loss.

Thank you‼️

This is genius

Woow wooow 😮 what a professional video, I'm considering doing it by myself , thank you 💯😃

Fail " remove center console " 😂😂😂

Unfortunately not so easy to replace highbeam bulb

Damm. My guy I scraped my radiator off my ritten off 2002 Toyota Estima the other day I live in Qld Australia I went to a place called H&H and they gave me $75 with the plastic housing still in! Curious to know if pricing has changed or what mine was destroyed from ahead on crash also my son pushed all the remaining good fins down and in I feel like you may have been ripped off because your one looked reusable

Short and sweet thank you

CLICK BAIT! Fold up your " I want to be kinda famous" site. Change the gas cap!? tell the whole sorry.....

How do you use this on a 2024 model?

Very smart shortcut. Thanks.

5wdf

I ordered a pre-owned rear view mirror for my 2007 IS 250. Since I was using just the replacement mirror, I was able to take the mirror frame off and replace the mirror. Unfortunately, the only thing that was different was the "mirror" wiring. I did not unplug anything else relative to the garage door function from my original casing since my car has the 3 button options. I purchased a mirror withOUT the 3 button option as it was cheaper. It looked brand new but stated it was pre-owned. The mirror fit fine into my original casing, but the wiring prongs on the new mirror did not fit the prong casing for the existing mirror plug/prongs. The endings to the wires are different. So, I don't have wiring connection to my mirror for the auto-dim and locational map. But, the mirror is clear. Not sure if the new wiring prongs can be cut and soldered to fit the casing. A little bummed. I probably should have purchased a pre-owned 3-button rear view mirror exactly as I have, but they were all over $150-$200 and some had the same scratched/blotted mirror. I bought my replacement rear view mirror for $41. But, I used your link and even scrolled a long time trying to find a replacement mirror for my exact rearview mirror and because you mentioned the mirror would fit fine using a mirror without the 3 buttons (garage door openings) which you have and using a mirror with just auto dimming it would work. Must be the year of the vehicle. But thanks for the video. I now can see from my mirror and the door opener works fine. I just lost the auto dim and directional features because wiring plugs/prongs were different and didn't fit.

What if I don't have original key fob anymore...

is this work for nissan rogue sv 2017 ???

Awesome. Thanks brother

Are you gonna make a video how to put a new one in or is just a plug-in?

What happens if I drove one minute to get home after the car started blowing white smoke?

This fix must be strictly followed for Nissan 2.5L engine only, I have the exact same Nissan Altima 2007 but a 3.5L V6 and the AC Pulley is pressed so there is no way on earth to remove this by hand, just realized now that I'll be needing a bearing puller.

Very good and straightforward instructions for moving the radio! Thank you.

I never disconected the battery i just wggled it around then figured out there was a little releas clip. Shit rolling inder my seat and hitting the wires csuseong my airbag lightbto come on.

At least clean the rotor allitle lol

on target this exactly what i needed. taking the air out and waiting a minute and then re trigger is correct

Just curious what the ground cable connected to the bracket right above the alternator supplies power to.. it seems to be part of the ac clutch wires that were tested possibly?

It’s a Allen 5/32 to take the two bolts out the value

jack stand

Good info!

After installation, can i just use EZ Chill freon from Walmart to add or does it need to be done at the shop?

07 altima owner here with the same issue. Thank you!

Gave a thumbs up.

What year was this Nissan Altima which trim was it? Watching you do this looked so simple how do you keep the screws in order to remember where they go? It looked fantastic! I have a 2012 Nissan Altima S and the whole dashboard is cracked and sticky I was considering a overlay in plastic but after watching you it seemed so practical and possible Thank you ❤ now to find the charcoal dashboard at a junk yard. Definitely Subscribe

thanks

Thanks !! This helped out a whole bunch. Straight to the point and very informative!!

Or just see if wire to compressor has power

Ummm maybe if you live in the south and your car is 3 years old never sees rain and is stored in the garage? Why don’t you come to NY and try this on a 10 year old daily driver… let us know how easy it is then!

You made it super easy. Thank you

Nice video men